ioSeal® Technology: The Only Ionic Protection for Quartz Resins & Composite Sinks
Stop "ghost stains" on white quartz and white haze on composite sinks. Our progressive ionic bond shields where traditional sealers fail—born from 25 years of fabrication expertise. Shop Stone CareThe Quartz Paradox: Non-Porous ≠ Stain-Proof
“Quartz is a hybrid: 93% stone and 7-10% polyester resin. While the stone is tough, the resin binder is vulnerable to UV yellowing, chemical etching, and ‘ghost stains.’ Traditional sealers can’t bond to these resins—leaving your surface unprotected.”
Ionic Bonding: Molecular Cross-Linking
“Unlike ‘nano’ coatings that sit on top, ioSeal® uses electrostatic attraction to anchor directly to quartz resins and stone minerals. It creates a breathable, permanent shield that doesn’t just sit there—it becomes part of the surface.”
Micro-Smooth & Friction-Resistant
“By filling microscopic voids, ioSeal® creates an ultra-smooth finish. Fingerprints won’t stick, metal marks won’t anchor, and ‘white haze’ can’t form. Your surfaces stay cleaner, longer, with just a simple wipe—no abrasives needed.”
“I spent 25 years in the shop seeing ‘bulletproof’ quartz fail. I developed ioSeal® to protect the resin binder and simplify surface care.”
Chemistry vs. Marketing: Why ioSeal® Outperforms “Nano” & Ceramic
“Most sealers are designed for the pores in rock. Engineered quartz isn’t just rock—it’s a unsaturated polyester resin hybrid. Here is why the ‘traditional stone’ sealers fail on engineered modern surfaces.” — especially on unsaturated polyester resins, and engineered composites.
| Feature | Supreme Surface® with ioSeal® | "Nano" & Ceramic Coatings |
|---|---|---|
| Resin Compatibility | Active Ionic Bond (Cross-links with polyester resins) | Fails to adhere; sits on top (causes hazing) |
| Internal UV Shield | Prevents resin yellowing from the inside out | Surface-only; no deep resin defense |
| Application Style | Progressive: Protection builds with every clean | Separate step; stripped away by dish soaps |
| Matte/Suede Finishes | Fills micro-voids; prevents fingerprints | Often leaves streaks or greasy residue |
| Surface Energy | Ultra-Smooth: Minerals can't find a foothold | Higher friction; requires heavy scrubbing |
Shop All-In-One Stone Care with ioSeal®
Is Your Sink Stained or Damaged? End the White Haze Cycle.
“Most people try to scrub ‘white haze’ away, but that usually makes it worse. 80% of haze isn’t dirt—it’s mechanical or chemical damage to the resin binder. Here is how to tell the difference.”
Cause #1: Mineral Buildup (Almost Disappears when wet)
If the white spots fade but are still somewhat noticable when the sink is wet you most likely have mineral deposits (calcium/magnesium).
- The Trap: Avoid a dulling your sink and faded color, don’t use abrasive pads! Try using Supreme Surface® Scum & Mineral Deposit Remover
- ioSeal Protects: Condition the surface smoother so minerals can’t anchor. “You can simply wipe away with soft sponge or cloth.”
Cause #2: Chemical Etching (Visible when wet)
“If the haze is visible even when the sink is wet, the resin has been ‘etched white’ by high-pH solutions: cleaners or bleach.
- The Trap: You can’t ‘clean’ an etch; you have to restore the surface. But only if it’s superfifial (gone when wet)
- ioSeal® Protects: Prevent the need for using harsh cleaners and textured pads. Too late? Try one of our sink and countertop surface care and repair kits that include our ioSeal Treatment to cross-link with the composite, stone, or resin resin to prevent it from happening again.”
Cause #3: Abrasive Scuffs (Micro-Scratching)
“Did you use a Magic Eraser or a textured scrubby? These create millions of micro-scratches in the polyester resin of quartz countertops and composite sinks that trap light and look white.
- The Trap: More scrubbing creates blemishes, dull color that can progress into a chaulk-like haze.
- Protect With ioSeal®: Stop dull spots and faded color on quartz countertops and granite composite from abrasive wear. Too late? Restore your sink with Supreme Surface® Composite Sink Restoration 3-step Guide.“
Cause #4: Burns - Thermal Shock (Heat Damage)
- Can This Be Fixed: While thermal shock often causes permanent damage, most spots that disappear when wet are superficial and can be repaired. Clean sinks that look good wet but not dry can most likely be restored using the Supreme Surface® . Composite Sink Restoration 3-step Guide. Spots visible on clean sinks when they are both wet and dry, however, indicate permanent damage.”
Restore Your Sink Today
One Formula. Every Surface. Total Protection
“Stop using the wrong tool for the job. Whether you call it our All-In-One Stone Care or our Granite, Quartz & Marble Treatment, it’s the same professional-grade powerhouse with ioSeal® technology. All-In-One spray bottle replaces your daily cleaner, polish, and your annual sealer” in one step.
ioSeal® Treatments
Multi-Purpose: Clean, Beautify, Protect, All-In-One Spray. Effectively break down the bonds that hold grease, dirt, remove and prevent ghost stains from “non-porous” quartz countertops.
Condition Surface
Prevent water spots on quartz and the “White Haze” cycle on sinks. Smooths the surface so minerals can’t anchor, eliminating the need for abrasives that ruin Blanco, Kraus, and Elkay sinks.
Quartz Resin Safe
The only treatment that cross-links with unsaturated polyester resins. Prevents UV yellowing, chemical etching, and “ghost stains” on white and matte finishes.
Granite, Quartzite, Travertine, Marble
A breathable, non-toxic barrier that deepens the natural color and provides a progressive ionic shield against oils, wine, and water spots.
“Pro Tip: This formula is the ‘Delivery Vehicle’ for ioSeal®. While it cleans, it simultaneously ‘re-ups’ your protection. Apply daily for the first 7–14 days on a new surface to build a bulletproof ionic layers.”
All-In-One Stone Care with ioSeal® Ionic Resin-Bonding Sealer for Quartz & Engineered Composite Materials
Wholesale & Dealer Pricing
Possible Content