Supreme Surface® All-In-One Stone Care with ioSeal®
Granite, Quartz & Marble Treatment
Optimize the look, feel, and protection of your countertops and sinks with Supreme Surface® All-In-One Stone Care with ioSeal. A multi-tasking powerhouse unlike generic cleaners, polishes, or traditional stone sealers, ioSeal® is a proprietary ionic resin-bonding sealer engineered for modern surface care— cleaning, protecting, and surface-optimizing in one simple step.
Engineered for polished, matte, and tactile finishes (including leathered and suede quartz), it works independently on quartz countertops, engineered composite sinks, and granite surfaces. On highly porous natural stone, seal or enhance first, then use Supreme Surface® routinely for surface-level optimization—every time you clean.
Guards Against Ghost Stains and Hard Water Deposits Where Others Fail
Unlike traditional stone care products, All-In-One Stone Care (Granite, Quartz & Marble Treatment) works as a routine, one-step system to clean, beautify, and protect your surfaces simultaneously.
The ioSeal® Advantage
Our proprietary protection builds progressively with every use—helping reduce surface energy so oils, pigments, and mineral deposits are less likely to bond. The result is easier maintenance, improved appearance, and long-term surface preservation.
- Easier Maintenance: Prevent the need for a textured non-scratch pads, magic erasiers, or other micro abrasives that dull surfaces.
- Progressive Protection: Surfaces become more resilient, less friction, more resistant against abrasives, UV rays, discoloration, fading, spotting, and peeling.
- Universal Compatibility: Specifically formulated for polished, matte, and textured finishes.
No marketing hype—just the science behind the resin, ghost stains, and how to protect polished, matte, and textured quartz.
All-In-One Stone Care is designed to work with natural stone, composite, and engineered surfaces — not against them — making it ideal for quartz resin and composite materials where conventional sealers often fall short.
Recommended by the Industry’s Leading Manufacturers & Distributors
🔹 GETTING STARTED
How to Use
All-In-One Stone Care is designed to optimize surface condition every time you clean and protect. Engineered for stone and stone composite surfaces using ioSeal® ionic resin-bonding sealer for quartz. For best results, follow the guidance below based on your surface type.
These initial use recommendations help establish a strong protective foundation. Once established, maintenance becomes easier and less frequent.
1️⃣ Stone Surfaces (Natural, Engineered, or Composite)
For surfaces in serviceable condition:
-
Use daily for the first 3–5 days
-
Allow the treatment to dwell for 1–2 minutes before final buffing
-
Buff dry with a clean microfiber towel
This brief dwell time allows ioSeal® to fully anchor to the freshly cleaned surface, accelerating the formation of a protective foundation.
After the initial period, use once weekly or as needed to clean, beautify, and protect.
2️⃣ White Polished Quartz & Matte / Textured Quartz (All Colors)
Quartz surfaces benefit from a longer initial conditioning phase due to resin binders.
-
Use daily for the first 10–14 days. Learn why white quartz stains and how to protect it →
-
For the first 3–5 applications, allow a 1–2 minute dwell time
-
Buff dry with a clean microfiber towel
This ensures ioSeal® properly integrates with resin components, improving resistance to:
-
Organic pigments (food oils, dyes)
-
Ghost staining
-
Hard water minerals
-
Surface dulling or yellowing
After the initial period, maintain weekly or as part of routine care.
3️⃣ Natural Granite
Granite contains natural pores that benefit from early saturation.
-
Use daily for the first 5–7 days
-
Allow a 1–2 minute dwell time during this initial phase
-
Buff dry thoroughly
This helps establish a breathable internal shield that reduces oil absorption and mineral intrusion. Afterward, use weekly or as needed.
4️⃣ Restored or New Composite Sinks
For sinks that have been:
-
Newly installed, or
-
Restored using our 3-Step Composite Sink System
-
No dwell time is required
-
Spray, wipe, and buff
-
Use daily for the first 3–5 days, then weekly or as needed
This maintains clarity, smoothness, and long-term surface performance.
⚠️ Important Notes
-
All-In-One Stone Care is not intended to remove heavy mineral scale, soap scum, or wax buildup
-
When buildup is present, pre-cleaning is recommended before treatment
-
Always buff the surface dry to prevent streaking or residue
Supporting Cleaners Between ioSeal® Treatments
🧴 DAILY STONE CLEANER —
Daily Stone Cleaner: Recommended for general streak-free cmulti-surface leaning with a paper towel between All-In-One Stone Care applications.
This fragrance-free, pH-neutral, alcohol-free formula safely removes light residues, oils, and fingerprints without interfering with ioSeal® protection or leaving films behind. It is ideal for countertops, backsplashes, and surrounding kitchen and bath surfaces.
Because it is truly streak-free when used with a paper towel, Daily Stone Cleaner is commonly used on glass, mirrors, stainless steel, appliances, LVT, vinyl, and fiberglass, making it a versatile everyday cleaner throughout the home.
👉 Learn how Daily Stone Cleaner works & where it’s best used →
🛒 Shop Value Pack | Daily Stone Cleaner + All-In-One Stone Care →
🧽 SCUM & MINERAL DEPOSIT REMOVER —
Scum & Mineral Deposit Remover is designed for pre-cleaning surfaces with existing hard water deposits, soap film, or mineral haze before beginning All-In-One Stone Care.
This targeted cleaner helps break down bonded mineral buildup and residues that routine cleaners cannot remove. Proper pre-cleaning ensures All-In-One Stone Care can interact directly with the surface — allowing ioSeal® to anchor correctly and perform as intended.
This product is especially important for:
-
Shower walls and wet areas
-
Quartz and stone with water spotting or haze
-
Surfaces that have not been properly maintained
👉 See how Scum & Mineral Deposit Remover is used →
🛒 Shop Value Pack | Scum & Mineral Deposit Remover + All-In-One Stone Care →
What Makes All-In-One Stone Care Different
All-In-One Stone Care uses ioSeal® — a proprietary ionic surface protection technology developed by Supreme Surface®. Rather than forming a topical coating or relying solely on pore saturation, ioSeal® works at the surface–material boundary, interacting with stone minerals and resin binders found in engineered surfaces. With regular use, protection builds progressively, helping surfaces stay cleaner, resist residue attachment, and maintain their original appearance with less effort.
👉 Learn more about why white quartz stains and how to protect it →