Supreme Surface® RESET — Scum & Mineral Deposit Remover — is a specialized, low-pH cleaning solution designed to remove bonded hard water mineral deposits, cloudy soap scum, and stubborn surface contamination from compatible surfaces, including engineered quartz, composite sinks, and glass shower enclosures.

Standalone Power or System Preparation

RESET is highly effective when used independently as a heavy-duty problem solver to tackle long-term buildup. It also serves as the essential decontamination step in the Supreme Surface® Care Methodology. By stripping away accumulated mineral deposits and bonded residue, RESET perfectly preps stone and composite surfaces for HEAL and GUARD featuring ioSeal®, or quartz counters and glass shower doors before applying BARE CLEAN.

Always follow surface-specific application instructions. Important: Do not use RESET on acid-sensitive surfaces such as polished marble, limestone, or travertine.

Recommended Surfaces & Applications

Supreme Surface® RESET — Scum & Mineral Deposit Remover — is a specialized, low-pH solution engineered for deep-cleaning and decontaminating compatible surfaces. RESET can be used independently to remove stubborn, long-term buildup or as the foundational preparation step in a Supreme Surface® Care System.

• Granite Composite & Quartz Sinks: Targets stubborn hard water mineral deposits, cloudy soap scum, and bonded surface contamination. This deep-cleaning process prepares composite sinks for optimal surface reconditioning and restoration with HEAL when needed.
• Tile & Grout Lines: Loosens and removes accumulated grime, mineral scale, and soap residue from compatible, acid-resistant tile and grout surfaces.
• Glass Shower Doors & Enclosures: Dissolves stubborn hard water spots, limescale, and cloudy soap films to instantly restore glass clarity.
• Granite Shower Seats & Thresholds: Removes bonded mineral deposits, soap scum, and buildup from compatible, acid-resistant granite surfaces frequently exposed to water.

Surface Compatibility & Material Care

Important Safety Restrictions: RESET is a low-pH formula and is not recommended for use on polished marble, limestone, travertine, onyx, or other acid-sensitive natural stone surfaces.

Always review surface-specific application guidelines before use. Shorter contact times are required when treating matte, honed, and suede quartz finishes. Limit contact to 30 seconds or less, then thoroughly rinse and neutralize according to the product application instructions.

Supreme Surface® RESET — Scum & Mineral Deposit Remover — uses a specialized, low-pH formulation designed to break down bonded mineral deposits, soap scum, and stubborn surface contamination on compatible materials.

• Purified Water Base: Provides the carrier for the cleaning ingredients without introducing unnecessary minerals into the formulation.
• Targeted Surfactants: Help loosen and lift soap residue, oils, and other surface contamination so they can be rinsed away.
• Fruit-Derived Organic Acids: Help dissolve calcium-based mineral deposits and hard water buildup through controlled acidic cleaning action.

RESET is intended for compatible, acid-resistant surfaces. It is not recommended for polished marble, limestone, travertine, or other acid-sensitive materials. Always follow surface-specific application instructions.

1. Apply RESET: Spray Supreme Surface® RESET directly onto the contaminated area of a compatible surface.
2. Allow Appropriate Contact Time: Follow the recommended dwell time for the specific surface and finish. On matte, honed, or suede engineered quartz, limit contact to 30 seconds or less.
3. Agitate as Needed: Gently work stubborn deposits with a compatible non-scratching sponge or soft-bristled brush. For composite sink restoration, optional abrasive reconditioning is a separate procedure performed during the RESET stage when necessary.
4. Rinse & Neutralize: Thoroughly rinse, neutralize as directed for the surface, and wipe dry. Evaluate the surface before proceeding with HEAL or GUARD, if applicable.

Important: RESET is a low-pH cleaning solution. Do not use on polished marble, limestone, travertine, or other acid-sensitive surfaces. Always follow surface-specific instructions.

Q: Is RESET safe for daily countertop use?
A: No. RESET is a specialized, low-pH cleaning solution designed to remove bonded mineral deposits, soap scum, and stubborn surface contamination when deeper cleaning is needed. For routine daily maintenance, use BARE CLEAN, our pH-neutral, residue-free Daily Stone Cleaner.

Q: Will RESET remove etch marks on marble?
A: No. RESET is not recommended for polished marble, limestone, travertine, or other acid-sensitive natural stone. Etch marks involve changes to the stone’s surface finish and may require professional honing or polishing. HEAL is formulated for composite sink restoration, not marble repair.

Q: Why is distilled water used as the base?
A: RESET is formulated with distilled water to minimize minerals and impurities introduced by the water itself. This provides a consistent base for the specialized organic acids and surfactants that help dissolve bonded mineral deposits, loosen soap scum, and remove surface contamination.